Units, Dimensions, and Errors
Target: JEE Main & JEE Advanced
Typical weightage: 1 to 2 questions in JEE Main (almost always 4 marks of “free” marks if your rules are crisp). In JEE Advanced it appears as experimental-skills questions (vernier, screw gauge, error analysis) and dimension-based derivations.
Micro-topics in this chapter
- Units and Measurement
- Dimensions and Dimensional Analysis
- Significant Figures and Rounding
- Errors and Their Propagation
- Measuring Instruments (Vernier Calipers, Screw Gauge, Zero Error)
Then: Chapter-End PYQ-Style Mock Test (68 marks) and the Diagnostic Scorecard.
1. Units and Measurement
Core Concept & Intuition
A physical quantity is number × unit:
The quantity is fixed by nature; only the pair changes with the choice of unit. Hence
Bigger unit means a smaller number. This single line decides every conversion problem.
SI base quantities and units (7): length (m), mass (kg), time (s), electric current (A), thermodynamic temperature (K), amount of substance (mol), luminous intensity (cd). Since the 2019 redefinition, the SI is defined by fixing exact values of , , , , , the caesium hyperfine frequency and . Radian (rad) and steradian (sr) are dimensionless derived units (earlier called supplementary units).
Converting between systems. If a quantity has dimensions :
SI prefixes to know cold:
| Prefix | Symbol | Factor | Prefix | Symbol | Factor |
|---|---|---|---|---|---|
| tera | T | pico | p | ||
| giga | G | femto | f | ||
| mega | M | atto | a | ||
| kilo | k | nano | n | ||
| centi | c | micro | |||
| milli | m | deci | d |
Practical units and conversions
| Unit | Value |
|---|---|
| 1 light year | m |
| 1 parsec | m ly |
| 1 astronomical unit (AU) | m |
| 1 angstrom (Å) | m |
| 1 fermi (fm) | m |
| 1 barn | m² |
| 1 atomic mass unit (u) | kg |
| 1 eV | J |
| 1 dyne | N |
| 1 erg | J |
| 1 cal | 4.18 J |
| 1 horse power | 746 W |
| 1 atm | Pa |
| 1 bar | Pa |
| 1 torr (mm Hg) | 133.3 Pa |
| 1 gauss | T |
| 1 poise | 0.1 Pa·s |
| 1 shake | s |
“The Easy Way” (Shortcuts, Pro-Tips & Common Pitfalls)
- Direction check. Going from a bigger unit system to a smaller one, the number grows. If your converted answer moves the wrong way, you inverted the ratio.
- Quick CGS to SI. Force: dyne to N is . Energy: erg to J is . Surface tension: dyne/cm to N/m is . Viscosity: poise to Pa·s is . Pressure: dyne/cm² to Pa is .
- Derived units from fixed constants. If a problem says “unit of X is defined as …”, immediately write the dimensional formula of the new unit in terms of the new base units and apply the conversion formula.
- Trap: Mixing “unit changes by factor ” with “numerical value changes by factor ”. They are reciprocal. Always state which one is asked.
- Trap: light year, parsec and AU are units of distance, not time. Shake, year and “light-second” are time-related; “light-year” is not.
- Trap: Prefix arithmetic with squares and cubes: , not .
Targeted Practice Problems
JEE Main Level Problem
In a new system of units, the unit of mass is 10 kg, the unit of length is 100 m, and the unit of time is 1 minute. What is the numerical value of a force of 1 N in this system?
View JEE Main Solution & Strategy
Key Insight / Formula: Force has dimensions , and .
Step-by-Step Working:
- , so
Final Answer: new units of force.
Sanity check: the new unit of force is N, which is smaller than 1 N. A smaller unit means a larger number, so the value must exceed 1. Consistent with .
JEE Advanced Level Problem
A system of units takes energy , velocity , and time as its base units. If each of these three units is made 4 times larger, by what factor does the numerical value of a given pressure change?
View JEE Advanced Detailed Solution
Underlying Principle: Express the derived quantity in the new base units, find how its unit scales, then invert for the numerical value.
Complete Analytical Derivation:
Express and through the base set:
Pressure , so
If , , , the unit of pressure scales as
The unit becomes of the old one, so the numerical value becomes 1024 times larger.
Pitfall to Avoid: Treating as a base unit and scaling it by 4. Here length is not independent: it is , so it scales by 16, and mass scales by .
2. Dimensions and Dimensional Analysis
Core Concept & Intuition
The dimensions of a quantity are the powers to which base quantities are raised to represent it, e.g. force: . Dimensions describe the kind of quantity, independent of the unit system.
Principle of Homogeneity. Every term in a physically valid equation must have the same dimensions. You can add or equate only like quantities. Arguments of , , , and powers like must be dimensionless.
Three uses
- Checking the dimensional consistency of an equation.
- Converting units between systems.
- Deriving the form of a relation (Rayleigh method / method of indices): assume and match exponents of .
Calculus dimension rules
Reference table: dimensional formulae
| Quantity | Dimensions | Quantity | Dimensions |
|---|---|---|---|
| Force | Surface tension | ||
| Work, energy, torque, heat | Viscosity | ||
| Power | Specific heat | ||
| Pressure, stress, Young’s modulus | Latent heat | ||
| Momentum, impulse | Boltzmann constant | ||
| Angular momentum, Planck’s constant | Gravitational constant | ||
| Moment of inertia | Charge | ||
| Electric field | Potential | ||
| Magnetic field | Magnetic flux | ||
| Capacitance | Resistance | ||
| Inductance | |||
| Universal gas constant |
Dimensionless quantities (JEE favourites): angle, strain, Poisson’s ratio, refractive index, relative density, Reynolds number , Mach number, coefficient of friction, , , and .
“The Easy Way” (Shortcuts, Pro-Tips & Common Pitfalls)
- Same-dimension families. Learn them as groups:
- Work = energy = torque = heat = = = = .
- Planck’s constant = angular momentum; = energy.
- Pressure = stress = energy density = Young’s modulus = = .
- Impulse = momentum.
- Latent heat = gravitational potential = (velocity)².
- Time: , , , , .
- Velocity: , , (string wave speed).
- Build, don’t memorise. : from , so .
- Rayleigh method. Set up a table of exponents, solve three equations (, , ). If more than three unknown exponents appear, dimensional analysis alone cannot fix them.
- Trap: Dimensional analysis cannot give pure numbers (, ), cannot handle sums of terms (like cannot be derived), and cannot distinguish quantities with equal dimensions (torque vs energy).
- Trap: A dimensionally correct equation is not necessarily physically correct.
- Trap: Surface tension is force per unit length, so , not .
- Trap: Angle has a unit (radian) but no dimension.
Targeted Practice Problems
JEE Main Level Problem
The van der Waals equation for one mole of a gas is
Find the dimensions of , , and .
View JEE Main Solution & Strategy
Key Insight / Formula: By homogeneity, has the dimensions of , and has the dimensions of .
Step-by-Step Working:
Final Answer: , , , which is the dimension of pressure.
Bonus: is energy.
JEE Advanced Level Problem
The time period of small oscillations of a liquid drop depends only on its density , radius , and surface tension . Use dimensional analysis to find the form of . Then state what happens to if the radius is doubled and the surface tension is quadrupled.
View JEE Advanced Detailed Solution
Underlying Principle: Rayleigh method of indices. Assume with dimensionless.
Complete Analytical Derivation:
Dimensions: , , , .
Equate exponents:
- :
- :
- :
So , , :
Now and :
Pitfall to Avoid: Using gives inconsistent equations (no solution). If your system of exponents has no solution, re-check the dimensional formula of each variable first. Also remember that (here a pure number) is not fixed by dimensional analysis.
3. Significant Figures and Rounding
Core Concept & Intuition
Significant figures (s.f.) tell how many digits of a measured value are reliable. A measurement ends with one uncertain digit; digits beyond that are meaningless.
Counting rules
- All non-zero digits are significant.
- Zeros between non-zero digits are significant (2005 has 4).
- Leading zeros are not significant (0.0025 has 2).
- Trailing zeros after a decimal point are significant (2.500 has 4; 0.0230 has 3).
- Trailing zeros in a number with no decimal point are ambiguous. In JEE, treat 1200 as 2 s.f. unless written as (4 s.f.) or “1200.” (4 s.f.).
- Powers of ten don’t change the count: has 2 s.f.
- Exact numbers (counted objects, , 2, used symbolically, unit conversions like 100 cm = 1 m) have infinite s.f.
Operations
- Addition/subtraction: the result keeps as many decimal places as the term with the fewest decimal places.
- Multiplication/division: the result keeps as many significant figures as the factor with the fewest s.f.
- Rounding: drop digits less than 5; raise the last retained digit if the dropped part is more than 5. For exactly 5 followed by nothing, JEE keeps the convention “round to even” if stated; otherwise the question avoids this case.
- Do intermediate calculations with one extra digit, then round once at the end.
“The Easy Way” (Shortcuts, Pro-Tips & Common Pitfalls)
- Decimal places for and , s.f. for and . Write it on the margin of your sheet before the exam.
- Scientific notation as a clarifier: converting units can change apparent s.f. only if you write it carelessly. should be written cm (3 s.f.).
- Trap: Counting leading zeros ( has 3 s.f., not 5).
- Trap: Using the number of s.f. of or a counted integer. These don’t limit the answer.
- Trap: Applying the multiplication rule to an addition problem. is limited by decimal places, not s.f.
Targeted Practice Problems
JEE Main Level Problem
(a) Add , and and report with the correct number of significant figures.
(b) The side of a square is measured as cm. Report its area with the correct s.f.
View JEE Main Solution & Strategy
Key Insight / Formula: Addition uses decimal places; multiplication uses s.f.
Step-by-Step Working:
(a) . The least precise term, , has one decimal place. Round to one decimal place: .
(b) . Each factor has 2 s.f., so the answer has 2 s.f.: (write as to make the 2 s.f. explicit).
Final Answer: (a) (b)
JEE Advanced Level Problem
The mass of a solid cylinder is g, its radius is cm, and its height is cm. Calculate its density with the correct number of significant figures, and identify which measurement limits the precision.
View JEE Advanced Detailed Solution
Underlying Principle: A product/quotient is limited by the factor with the fewest s.f.; is exact and never limits.
Complete Analytical Derivation:
s.f. count: has 4, has 3, has 2. The height cm has the fewest, so the answer has 2 s.f.:
Pitfall to Avoid: Limiting the answer by the 3 s.f. of , or by the s.f. of (treat as exact). Also the exponent in is exact.
4. Errors and Their Propagation
Core Concept & Intuition
Types of error
- Systematic errors: repeatable, same direction. Instrumental (zero error, miscalibration), personal (parallax), or from an imperfect method (ignoring air resistance). Reducible by correction or better technique, not by averaging.
- Random errors: unpredictable, both signs. Reduced by averaging many readings.
- Gross errors: blunders in reading or recording.
Definitions (for readings )
Result is reported as . For a single reading, the error is taken as the least count of the instrument.
Combination of errors (maximum-error rules)
| Operation | Rule |
|---|---|
| or | |
| or | |
Derivation of the general rule. Take logarithms and differentiate:
Errors are assumed to add in the worst case, so every sign becomes and the exponents enter as absolute values.
Non-power-law functions. For :
Statistical remark. The standard deviation of the mean of independent readings falls as . When oscillations are timed instead of one, the relative error in the period falls by a factor of (since and is fixed at about the stopwatch least count).
“The Easy Way” (Shortcuts, Pro-Tips & Common Pitfalls)
- Subtraction never reduces error. . Subtracting two nearly equal quantities gives a large relative error.
- Percent-error shortcut: write the formula, list exponents with absolute values, and multiply each by its % error. Constants (, 2, , ) contribute zero.
- Powers multiply the % error; roots divide it. gives , so .
- Trap: Using . That is the root-sum-square (statistical) rule. JEE uses simple addition unless the question says “standard deviation” or “uncertainty in quadrature”.
- Trap: When a quantity involves a sum in the denominator (lens formula, parallel resistors, inside a power), you cannot just add relative errors. Differentiate instead (see Advanced problem).
- Trap: Reporting the error with more digits than the measurement. Report the error to 1 s.f., and the value to the same decimal place.
Targeted Practice Problems
JEE Main Level Problem
The mass and volume of a body are found to be kg and m³. Find its density with error.
View JEE Main Solution & Strategy
Key Insight / Formula: , so .
Step-by-Step Working:
- kg/m³
- kg/m³
Final Answer: kg/m³
JEE Advanced Level Problems
Problem A (pendulum). To find , the length of a simple pendulum is measured as m with an error of mm. The time for oscillations is s with a stopwatch of least count s. Find the percentage error in , and explain how the answer changes if oscillations are timed (taking s).
View JEE Advanced Detailed Solution (Problem A)
Underlying Principle: with , so and ( is exact).
Complete Analytical Derivation:
For oscillations, s: , so .
Pitfall to Avoid: Using . The count is exact and contributes nothing. Also don’t add the stopwatch error times: the error in is the least count once (the start/stop pair), which is why timing more oscillations improves the result.
Problem B (lens). In a lens experiment, the object distance is cm and the image distance is cm (magnitudes). Find the focal length with error using .
View JEE Advanced Detailed Solution (Problem B)
Underlying Principle: Differentiate the reciprocal relation. Sum in the denominator means the “add relative errors” rule fails.
Complete Analytical Derivation:
Differentiating :
Pitfall to Avoid: Writing (that would give instead of the correct ). That rule applies only to pure products and quotients.
5. Measuring Instruments: Vernier Calipers, Screw Gauge, Zero Error
Core Concept & Intuition
Least count (LC) is the smallest value an instrument can measure.
Vernier calipers
- vernier scale divisions (VSD) coincide with main scale divisions (MSD):
- Reading MSR (coinciding VSD LC), where MSR is the main scale reading just left of the vernier zero.
Screw gauge
- Pitch distance moved by the screw in one full rotation of the circular scale.
- Reading PSR (pitch scale reading, in mm) (CSR LC).
Zero error. Close the jaws and note the reading (signed). Then
- Positive zero error (): instrument reads more than zero when closed. Subtract it.
- Negative zero error (): instrument reads less than zero. Add its magnitude.
Error types in the instrument: zero error and backlash are systematic; reading uncertainty is up to the LC.
“The Easy Way” (Shortcuts, Pro-Tips & Common Pitfalls)
- Pitch from the problem text. If “the main scale moves by divisions in one full rotation”, pitch (value of one main-scale division). Do not assume pitch equals the main-scale division.
- Negative zero error on a screw gauge. If the circular scale zero lies above the reference line by divisions when closed, . If the circular scale shows reading (just before completing a rotation), also .
- Always apply the correction to each reading before averaging.
- Trap: Adding a positive zero error instead of subtracting it.
- Trap: Using 1 MSD for the vernier. LC is .
- Trap: Confusing a stopwatch least count (a systematic limit) with random error: the stopwatch LC sets per reading.
Targeted Practice Problems
JEE Main Level Problem
A vernier caliper has 10 vernier divisions equal to 9 main-scale divisions, and 1 MSD mm. With the jaws closed, the 3rd vernier division coincides with a main-scale line. While measuring a rod, the main scale reads cm and the 6th vernier division coincides. Find the correct length.
View JEE Main Solution & Strategy
Key Insight / Formula: . True reading observed zero error.
Step-by-Step Working:
- Zero error cm
- Observed cm
- True cm
Final Answer: cm
JEE Advanced Level Problem
A screw gauge has a main scale of pitch 0.5 mm (each main-scale division is 0.5 mm) and a circular scale with 100 divisions. For one full rotation of the circular scale, the main scale shifts by two divisions. The wire diameter is measured in two attempts, after noting the reading with the two arms touching:
| Condition | Main scale reading (div) | Circular scale reading (div) |
|---|---|---|
| Two arms touching, no wire | 0 | 4 |
| Attempt 1 (with wire) | 4 | 20 |
| Attempt 2 (with wire) | 4 | 16 |
Find the diameter of the wire and the cross-sectional area with errors (treat the error as the mean absolute deviation).
View JEE Advanced Detailed Solution
Underlying Principle: Pitch comes from the “two divisions per rotation” statement, then correct every reading for zero error, then average and propagate.
Complete Analytical Derivation:
- Pitch mm, so mm.
- Zero reading: mm (positive zero error).
- Attempt 1: PSR mm; CSR mm; observed ; corrected mm.
- Attempt 2: PSR ; CSR ; observed ; corrected mm.
- Mean mm; deviations are and , so mm.
Pitfall to Avoid: Taking the pitch as 0.5 mm (that is the main-scale division, not the pitch here) and forgetting to subtract the positive zero error from each reading. Also note the factor 2 in the error of .
Quick Formula Sheet
Chapter-End PYQ-Style Mock Test
Note on sources: These questions are built on recurring JEE Main (2018 to 2025) and JEE Advanced / IIT-JEE (2000 to 2025) question patterns. Several are reconstructions or adaptations (numbers and options may differ from the original paper). Verify exact year tags against the official papers before publishing them as “authentic PYQs”.
Total marks: 68 | Time: 60 minutes
- Section 1 (Q1 to Q10): Single correct (JEE Main pattern). +4 correct, incorrect, 0 unattempted. (40 marks)
- Section 2A (Q11 to Q14): Multiple correct (JEE Advanced pattern, with partial marking). +4 if all correct options (and only those) are chosen. Partial credit, only when no incorrect option is chosen: +3 if all four options are correct and three are chosen; +2 if three or more options are correct and exactly two correct options are chosen; +1 if two or more options are correct and exactly one correct option is chosen. if any incorrect option is chosen. 0 if unattempted. (16 marks)
- Section 2B (Q15 to Q18): Numerical value. +3 correct, 0 otherwise. (12 marks)
Section 1: Single Correct Option
Question 1 (JEE Main pattern: dimensions)
Which of the following pairs does not have the same dimensions?
- (A) Planck’s constant and angular momentum
- (B) Latent heat and gravitational potential
- (C) Impulse and force
- (D) Work and torque
Check Answer & Scoring
- Correct Option / Value: (C)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation:
- . (A) same.
- Latent heat J/kg ; gravitational potential J/kg . (B) same.
- Impulse , but force . (C) differ.
- Work and torque are both . (D) same.
Question 2 (JEE Main pattern: unit conversion)
The surface tension of water is dyne/cm. Its value in SI units is
- (A) N/m
- (B) N/m
- (C) N/m
- (D) N/m
Check Answer & Scoring
- Correct Option / Value: (C)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation: Shortcut: dyne/cm to N/m is always .
Question 3 (JEE Main pattern: dimensions of constants)
In the relation , is pressure, is distance, is the Boltzmann constant and is temperature. The dimensional formula of is
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (B)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation:
- The exponent is dimensionless, so .
- gives .
- So .
Question 4 (JEE Main pattern: electromagnetic dimensions)
The dimensional formula belongs to
- (A) resistance
- (B) inductance
- (C) capacitance
- (D) magnetic flux
Check Answer & Scoring
- Correct Option / Value: (B)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation: Energy in an inductor is , so . Others: resistance ; capacitance ; flux .
Question 5 (JEE Main pattern: significant figures)
The length and breadth of a rectangular sheet are measured as cm and cm. Its area, to the correct number of significant figures, is
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (B)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation: . Both factors have 3 s.f., so the product has 3 s.f.: .
Question 6 (JEE Main pattern: error propagation)
A physical quantity is . The percentage errors in , , , are , , , respectively. The percentage error in is
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (C)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation:
Question 7 (JEE Main pattern: error in a sum)
Two resistors and are connected in series. The equivalent resistance is
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (A)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation: For a sum, absolute errors add: . Option (B) is the root-sum-square trap (), which is not used in JEE unless stated.
Question 8 (JEE Main pattern: pendulum error)
In an experiment to find using a simple pendulum, the length is measured with error and the time period with error. The percentage error in is
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (C)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation: , so .
Question 9 (JEE Main pattern: vernier calipers)
A vernier caliper has 20 divisions on the vernier scale that coincide with 19 divisions of the main scale (1 MSD mm). When the jaws are closed, the 4th vernier division coincides with a main-scale line. While measuring a cylinder, the main scale reading is cm and the 7th vernier division coincides. The correct length is
- (A) cm
- (B) cm
- (C) cm
- (D) cm
Check Answer & Scoring
- Correct Option / Value: (A)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation:
- .
- Zero error cm.
- Observed cm.
- True cm.
Question 10 (JEE Main pattern: screw gauge)
A screw gauge has pitch mm and circular scale divisions. With the studs touching, the zero error is mm. While measuring a wire, the pitch scale reading is mm and the circular scale reading is . The diameter of the wire is
- (A) mm
- (B) mm
- (C) mm
- (D) mm
Check Answer & Scoring
- Correct Option / Value: (C)
- Marking Scheme:
- Correct:
+4 - Incorrect:
-1 - Unattempted:
0
- Correct:
- Methodology & Explanation:
- mm.
- Observed mm.
- True observed mm.
Section 2A: Multiple Correct Options
Question 11 (JEE Advanced pattern: dimensionless combinations)
Which of the following combinations is/are dimensionless? (: density, : speed, : length, : viscosity, : gravitational constant, : mass, : length, : speed of light, : reduced Planck constant, : mass, : electronic charge, : permittivity of free space)
- (A)
- (B)
- (C)
- (D)
Check Answer & Scoring
- Correct Option / Value: (A), (B), (C)
- Marking Scheme:
- Full marks (all correct options chosen, none incorrect):
+4 - Partial:
+2if exactly two options chosen, both correct;+1if exactly one option chosen, and it is correct - Any incorrect option chosen:
-1 - Unattempted:
0
- Full marks (all correct options chosen, none incorrect):
- Methodology & Explanation:
- (A) Reynolds number: . Dimensionless.
- (B) , divided by gives 1. Dimensionless.
- (C) and (angular momentum). Dimensionless.
- (D) has dimensions of energy length ; dividing by gives , a velocity. (Dividing by would give the fine-structure constant.) Not dimensionless.
Question 12 (JEE Advanced pattern: error in a difference)
Two quantities are measured as and , and . Which statement(s) is/are correct?
- (A) The absolute error in is
- (B) The relative error in is
- (C) The percentage error in is
- (D) The relative error in is smaller than the relative error in
Check Answer & Scoring
- Correct Option / Value: (A), (B), (C)
- Marking Scheme:
- Full marks (all correct options chosen, none incorrect):
+4 - Partial:
+2if exactly two options chosen, both correct;+1if exactly one option chosen, and it is correct - Any incorrect option chosen:
-1 - Unattempted:
0
- Full marks (all correct options chosen, none incorrect):
- Methodology & Explanation:
- and . (A) true.
- Relative error , i.e. . (B) and (C) true.
- Relative error in is , far smaller than . (D) false. Subtracting nearly equal numbers magnifies relative error.
Question 13 (JEE Advanced pattern: scope of dimensional analysis)
Which of the following statements about dimensional analysis is/are correct?
- (A) It can be used to check the dimensional consistency of a derived relation
- (B) It can determine the dimensionless constant in
- (C) The argument of a trigonometric, logarithmic or exponential function must be dimensionless
- (D) A dimensionally correct equation is always physically correct
Check Answer & Scoring
- Correct Option / Value: (A), (C)
- Marking Scheme:
- Full marks (all correct options chosen, none incorrect):
+4 - Partial:
+1if exactly one option chosen, and it is correct - Any incorrect option chosen:
-1 - Unattempted:
0
- Full marks (all correct options chosen, none incorrect):
- Methodology & Explanation:
- (A) True: it is a consistency check.
- (B) False: pure numerical factors cannot be found by dimensional analysis.
- (C) True: these functions have series expansions in powers of their argument, which would mix dimensions otherwise.
- (D) False: dimensional consistency is necessary, not sufficient. For example, is dimensionally consistent but physically wrong (the correct term is ).
Question 14 (JEE Advanced pattern: zero error)
Which of the following is/are correct about zero error in a vernier caliper or screw gauge?
- (A) For a positive zero error, the true reading is obtained by subtracting the zero error from the observed reading
- (B) For a negative zero error, the magnitude of the error is added to the observed reading
- (C) Zero error is a random error and is reduced by taking the mean of many readings
- (D) Zero error is eliminated by taking more readings and averaging
Check Answer & Scoring
- Correct Option / Value: (A), (B)
- Marking Scheme:
- Full marks (all correct options chosen, none incorrect):
+4 - Partial:
+1if exactly one option chosen, and it is correct - Any incorrect option chosen:
-1 - Unattempted:
0
- Full marks (all correct options chosen, none incorrect):
- Methodology & Explanation: True observed with signed : subtract if , add if . Zero error is systematic (same value every time), so averaging does not remove it. (C) and (D) are false.
Section 2B: Numerical Value Type
Question 15 (JEE Advanced pattern: units from fundamental constants)
The Planck time is . Taking J·s, N·m²/kg² and m/s, the value of is s. Find (round to one decimal place).
Check Answer & Scoring
- Correct Option / Value: 5.4
- Marking Scheme:
- Correct:
+3 - Incorrect:
0 - Unattempted:
0
- Correct:
- Methodology & Explanation: Derivation by indices: with , , gives , , , so , . Numerics: ; ; ratio ; square root s. So .
Question 16 (JEE Advanced pattern: error in kinetic energy)
A body of mass kg moves with speed m/s. The percentage error in its kinetic energy is ______ %.
Check Answer & Scoring
- Correct Option / Value: 9
- Marking Scheme:
- Correct:
+3 - Incorrect:
0 - Unattempted:
0
- Correct:
- Methodology & Explanation: , . The factor is exact.
Question 17 (JEE Advanced pattern: screw gauge with zero correction)
A screw gauge has a pitch of mm and divisions on the circular scale. With the studs touching, the circular scale reads divisions (zero error). When a wire is placed, the pitch scale reading is mm and the circular scale reading is . The diameter of the wire in mm (to two decimal places) is ______.
Check Answer & Scoring
- Correct Option / Value: 2.28
- Marking Scheme:
- Correct:
+3 - Incorrect:
0 - Unattempted:
0
- Correct:
- Methodology & Explanation:
- mm.
- Zero error mm.
- Observed mm.
- True mm.
Question 18 (JEE Advanced pattern: dimensional formula of )
The dimensional formula of the permittivity of free space is . The value of is ______.
Check Answer & Scoring
- Correct Option / Value: 2
- Marking Scheme:
- Correct:
+3 - Incorrect:
0 - Unattempted:
0
- Correct:
- Methodology & Explanation: From Coulomb’s law, , so . .
Chapter Diagnostic Scorecard
Total marks: 68 (Section 1: 40, Section 2A: 16, Section 2B: 12).
| Metric | Your Count | Points |
|---|---|---|
| Section 1 correct (Q1 to Q10) | ___ |
Count × (+4) = ___ |
| Section 1 incorrect | ___ |
Count × (-1) = -___ |
| Section 2A fully correct (Q11 to Q14) | ___ |
Count × (+4) = ___ |
| Section 2A partially correct | ___ |
Sum of +1 / +2 / +3 = ___ |
| Section 2A incorrect (any wrong option) | ___ |
Count × (-1) = -___ |
| Section 2B correct (Q15 to Q18) | ___ |
Count × (+3) = ___ |
| Unattempted (all sections) | ___ |
0 |
| Net Score | — | ___ / 68 |
Proficiency Benchmark:
- ≥ 80% Net Score (54 or above): JEE Advanced Top 1,000 readiness.
- 60% - 79% Net Score (41 to 53): Strong JEE Main footing; needs work on Advanced multi-variable edge cases (sum-in-denominator errors, Rayleigh method, instrument data tables).
- < 60% Net Score (below 41): Revisit the “Common Pitfalls” and micro-topic explanations above.