← All notes & experiments

Wavelength of Spectral Lines

Optics · Updated 28 September 2026

Aim. To determine the wavelengths of different spectral lines of a given source of light using a diffraction grating in the normal-incidence position.

Apparatus.

  • Plane diffraction grating
  • Spectrometer and spirit level
  • Reading lens
  • Sodium vapour lamp

The manual’s title refers to the mercury spectrum, while its apparatus list names a sodium vapour lamp. Use the lamp your instructor specifies.

Principle

A plane diffraction grating is a glass plate ruled with equidistant, very fine parallel lines (about 15,000 per inch). Light incident on it is diffracted into several orders on each side of the direct beam, and each wavelength appears at its own angle.

Theory

If light of wavelength λ\lambda falls normally on a grating having NN lines per cm, the nnth-order image appears at the angle θ\theta where

sin⁡θ=nNλ⇒λ=sin⁡θnN\sin\theta = nN\lambda \qquad\Rightarrow\qquad \lambda = \frac{\sin\theta}{nN}

For example, 15,000 lines per inch corresponds to N=15000/2.54≈5906N = 15000 / 2.54 \approx 5906 lines per cm.

Procedure checklist

  • Do the usual spectrometer adjustments (eyepiece, telescope, collimator, levelled table) and find the vernier least count.
  • Illuminate the slit, bring the telescope in line with the collimator and note the direct reading on both verniers.
  • Set the grating for normal incidence: with the grating on the table, turn the telescope to 90∘90^\circ and rotate the table until the slit image reflected from the grating surface is on the cross-wire, then turn the table through 45∘45^\circ so the grating plane is perpendicular to the collimator.
  • Clamp the table and move the telescope to find the spectra on the left and the right.
  • For each line and each order, set the cross-wire on the line and note both verniers on the left and right.
  • Half the angle between left and right positions gives θ\theta.
  • Calculate λ=sin⁡θ/(nN)\lambda = \sin\theta/(nN) for each line.

Precautions

  1. Level the prism table (grating table) before starting.
  2. Keep the grating plane perpendicular to the collimator once adjusted; do not disturb the table.
  3. Do not touch the ruled surface of the grating.
  4. Read both verniers and take the mean.

Result

Wavelengths of the spectral lines: λ=____\lambda = \_\_\_\_ Å.

Download

Download the lab manual (PDF)

Lab manual (PDF)

Wavelength of Spectral Lines Download