Wedge Method
Aim. To determine the thickness of a thin wire or hair of variable thickness by forming parallel fringes.
Apparatus.
- Sodium vapour lamp
- Travelling microscope
- Two plane glass plates
- Thin wire, hair or a small piece of paper
- Black paper and a reading lens
Principle
Two plane glass plates are in contact along one edge. At the other edge a thin wire or hair keeps them slightly apart, so the air between them forms a thin wedge. Light reflected from the two surfaces of the wedge interferes, giving straight, parallel, equally spaced fringes parallel to the edge of contact.
Theory
Let the wedge angle be and the thickness at a distance from the edge be . For normal incidence in air the dark fringes occur where . Two successive dark fringes are separated by , so the fringe width is
If the wire of thickness lies at a distance from the edge of contact, then and
Procedure checklist
- Clean the two plates, put the wire between them at one end and clamp them lightly to form the wedge.
- Place the wedge on the black paper under the travelling microscope, with the sodium lamp and a glass plate giving normal illumination.
- Focus the microscope on the parallel fringes.
- Measure the position of, say, 10 successive dark fringes; divide the total distance by 10 to get the fringe width .
- Measure the distance from the line of contact to the wire.
- Take for sodium light and calculate .
- Repeat for different positions and take the mean.
Precautions
- Clean the glass plates thoroughly.
- Keep the plates undisturbed once the fringes are formed.
- Move the microscope in one direction only to avoid backlash error.
- The fringes should be parallel to the cross-wire.
Result
The thickness of the wire is cm.