Torsional Pendulum Experiment
Aim. To determine the rigidity modulus of the material of a given wire using a torsional pendulum.
Apparatus.
- Torsional pendulum (metal disc suspended from a wire)
- Thin wire
- Stop watch
- Screw gauge and vernier calipers
- Metre scale
Principle
A heavy disc hangs from a thin wire. When the disc is twisted through a small angle and released, the wire’s restoring torque makes it oscillate about the wire axis with a time period that depends on the wire’s rigidity modulus .
Theory
The restoring torque is proportional to the angular twist, , where the torsional constant of a wire of length and radius is
The disc has moment of inertia about the wire axis, and its time period is . Eliminating and gives
where is the mass of the disc, its radius, the radius of the wire, the length of wire between the chucks, and the time period.
Procedure checklist
- Measure the mass of the disc and its radius with the vernier calipers.
- Measure the diameter of the wire at several places with the screw gauge and take the mean to get .
- Set the length between the upper and lower chucks and measure it.
- Twist the disc through a small angle, release it and time 20 oscillations; find .
- Repeat for a few different lengths and calculate each time.
- Optionally plot against : the graph is a straight line through the origin.
Precautions
- The wire should be thin, straight and free of kinks.
- Twist through a small angle so the wire stays within its elastic limit.
- Make sure the disc rotates horizontally, without swinging sideways.
- Measure between the two chucks and the wire diameter at several points.
Result
The rigidity modulus of the wire is N/m.